Taifun GT ONE 23mm by SmokerStore 

Taifun® GT ONE - The affordable entry into the world of self-winding atomizers from Taifun® - The definition of high end MADE IN GERMANY

The Taifun® GT ONE is the first atomizer from Taifun® in the price range up to €100 and is still 100% Made in Germany.

Visually based on the first Taifun® GT, it is not a remake or facelift model. The internal structure of the evaporator chamber and the winding deck differ fundamentally from the original Taifun® GT and correspond more to a revised version of the Taifun® GT III. The Taifun® GT ONE is a pure single coil atomizer designed for MTL and restrictive DL vaping and is not only aimed at users who prefer a noticeable throat hit. The included threaded screw can optionally be used for this. Due to the changed compression conditions, the evaporator may feel a little more open, depending on your own draw type, and the throat hit can be strengthened as a result.

There is a replaceable Air Pin with a diameter of 1.2 mm (delivery state) in the base directly under the winding. Air pins with diameters of 0.8 mm, 1.0 mm, 1.5 mm and 1.8 mm are optionally available. These are made entirely of medical grade stainless steel. The Air Pins sit very tightly in the base to exclude any secondary air. After purchasing a certain pin or after using it for a long time, it is advisable to dismantle the positive pole in order to be able to replace the Air Pin more easily. The Taifun® GT One completely dispenses with air flow control.

A liquid control is not available. The Taifun® GT ONE is classically filled from below. For filling, it is advisable to hold the tank in your hand at a slight angle and turn it at the same time (so that the liquid is distributed more quickly and does not run into the chimney). It is also advisable to look through the tank from the outside and not from above.

Brief overview of the device properties of the Taifun® GT ONE

• Single coil rebuildable atomizer
• 23mm diameter
• 46 mm height (visible height without DripTip)
• Bottom fill
• 4.0 ml tank volume
• variable restrictive air supply (adjustable via optionally available air pins)
• closable air channel of 1.6 mm diameter to increase the throat hit
• 510 DripTip of the Taifun® GTR (4 mm inner diameter)
• Stainless steel 1.4301, PEEK, PSU
• special instructions

Avoid extremely acidic liquids and flavors. These can possibly attack the PSU tank. Basically, it is not a question of taste, so menthol, cooling and many other well-known flavorings are not a problem. But especially with pure citrus aromas, it cannot be ruled out that these will attack the tank at some point. We advise against the use of nicotine salt liquids in the Taifun® GT ONE. We cannot guarantee that these products will not damage the PSU tank.

Package includes:

1x Taifun GT ONE including Air Pin 1.2 mm

1x 510 DripTip of the Taifun GTR

1x Taifun Spaced Coil 1.7Ω

1x replacement O-rings

1x 1.3 mm Allen key

1x 0.9 mm Allen key

1x instruction manual